Vk-172 Driver -

Here is the text for a VK-172 driver (typically for Linux systems, as the VK-172 is a USB GPS receiver based on the u-blox chipset). Introduction

Windows will usually install the USB Serial Device driver (usbser.sys) automatically. Check in Device Manager under Ports (COM & LPT) . You will see something like USB Serial Device (COM3) .

The VK-172 is a standard USB CDC device. No special drivers are needed in most modern operating systems—just plug it in and read NMEA sentences from the virtual serial port.

ls -l /dev/ttyACM* /dev/ttyUSB* Use cat , screen , or minicom to read NMEA sentences: vk-172 driver

If it shows as an unknown device, download the u-blox Virtual COM Port Driver from the official u-blox website or use a generic USB CDC ACM driver.

This document explains how to verify, install, and troubleshoot the necessary drivers for the VK-172 on Linux, Windows, and Android. The VK-172 is plug-and-play on most Linux distributions. The kernel includes the cdc_acm driver.

To use the GPS without sudo , add your user to the dialout group: Here is the text for a VK-172 driver

https://github.com/torvalds/linux/blob/master/drivers/usb/class/cdc-acm.c No additional out-of-tree driver is required. | OS | Driver | Device Name | |----|--------|--------------| | Linux | cdc_acm (built-in) | /dev/ttyACM0 | | Windows | USB Serial Device (usbser.sys) or u-blox VCP | COM3 (example) | | Android | OTG + Serial USB app | N/A (app-specific) |

usb 1-1.2: new full-speed USB device number 6 using xhci_hcd usb 1-1.2: Product: u-blox 7 - GPS/GNSS Receiver cdc_acm 1-1.2:1.0: ttyACM0: USB ACM device The device will be created as /dev/ttyACM0 or /dev/ttyUSB0 . Check with:

sudo stty -F /dev/ttyACM0 9600 Windows recognizes the VK-172 as a serial-over-USB device. You will see something like USB Serial Device (COM3)

The VK-172 typically runs at 9600 baud (u-blox 7) or 115200 baud (u-blox 8). Use stty :

dmesg | tail -20 You should see output similar to:

Plug in the VK-172 and run:

sudo cat /dev/ttyACM0 (Output example: $GPGGA,123519,4807.038,N,01131.000,E,1,08,0.9,545.4,M,46.9,M,,*47 )