How To Reset Dahua Ip Camera Without Reset Button (2024)

Always try ConfigTool's "Forgot Password" export first. It’s non-invasive and takes 5 minutes. Only break out the soldering iron or TFTP server if you're locked out completely. And remember—on 99% of Dahua cameras without a visible button, the reset is actually performed by holding down the SD card eject button (if present) for 15 seconds while powering on. Check that first.

He soldered wires to TX , RX , and GND (never VCC ) and connected them to a USB-to-TTL adapter ( 3.3V logic). Using PuTTY (a serial terminal) at 115200 baud , he powered the camera. how to reset dahua ip camera without reset button

For three seconds, nothing happened. Then, the TFTP server window lit up: "Connection received from 192.168.1.108... Downloading update.img..." Always try ConfigTool's "Forgot Password" export first

It was 11 PM on a Tuesday when Mark realized his mistake. He had just bought a used Dahua IPC-HFW1831E from an online auction. The camera was a beast—4K, night color, the works—for a fraction of the retail price. The problem? The previous owner had forgotten to remove it from their account. The camera was locked. To make matters worse, this model had no visible reset button. No tiny pinhole. No recessed switch. Just a weather-sealed housing and a single Ethernet port. And remember—on 99% of Dahua cameras without a